Battery - Whale PE-12-025 User Manual

Portable ultrasound diagnostic scanner
Table of Contents

Advertisement

Unit Connection
STEP 2
STEP 3
4.2.3

Battery

The Portable Ultrasound Diagnostic Scanner can be powered by two differ-
ent power sources in three different configurations:
The battery can provide power when an AC power source is unavailable, and
it can last 1.5 hours of battery life with a single fully charged battery. Wasted
batteries need to be put into a chemical waste collection station.
Rev 1.00
Ensure there is nothing is placed over AC adapter's power cable, and
CAUTION
the cable is not located where it can be tripped over or stepped on.
Placed the AC adapter in a ventilated area before it is used to power
CAUTION
the unit.
Make sure the wall outlet matches with the power adapter plug.
Plug the power plug into the wall outlet.
Avoiding risk of fire, the unit's power must be supplied by a separate
WARNING
and appropriately rated outlet.
The power cord should not be used for a configuration rated less than
WARNING
the specified current under any circumstance.
Do not use extension cords or adapter plugs.
WARNING
AC power adapter only (without the battery).
AC power adapter and a battery (battery being charged in the system).
Battery only (without power from the AC power adapter).
When charging the battery, the ambient temperature must be
between 0
WARNING
the ambient temperature must be between -20
).
~45
(32
~113
Chapter 4 - Start-up
). When discharging the battery,
~60
(-4
~140
49

Advertisement

Table of Contents
loading

Table of Contents