Whale PE-12-025 User Manual page 189

Measurement
STEP 1
Enter a Exam and perform measurement
STEP 1
STEP 2
STEP 3
STEP 4
Perform a measurement for another study
STEP 1
STEP 2
STEP 3
STEP 4
Rev 1.00
Press Measure key on the control panel. The Measurement soft
menu is displayed.
Figure 7-49: Special Measurement Soft Menu
1 Exam subjects 2
3 Opened Exam 4
Press Measure key on the control panel to enter Measurement
mode. The Measurement soft menu with a list of exam is displayed.
Select the exam. The Measurement soft menu with a list of param-
eters is displayed.
Within the selected exam, select the parameter.
Perform the measurement. The parameter's name and measured
value will appear in the Measurement result table.
Trackball to the Opened study.
Press Set key on the control panel. The Measurement soft menu
with a list of studies is displayed.
Select the exam. The Measurement soft menu with a list of param-
eters is displayed.
Trackball to the measurement to perform.
Selected Exam
Measurements related to the Opened Exam
Chapter 7 - System Operation
189