Table of Contents
Advertisement
Cine Loop
To view a single-frame cine file
STEP 1
STEP 2
To store a multi-frame cine file
STEP 1
STEP 2
STEP 3
To view a multi-frame cine file
STEP 1
STEP 2
Rev 1.00
Press Trackball key on the control panel to activate the mouse, and
navigate the cursor to the single-frame cine file.
Use the Set key to double click the single -frame cine file. The image
of this single -frame cine file will be displayed.
Enter real-time imaging condition or Cine automatic playback state.
Press Store key on the control panel to save the multi-frame image.
The cine loop is stored and a thumbnail is displayed on the clip-
board. The "loop" icon on the thumbnail image indicates that the
media is a cine. A serial number is assigned for each thumbnail,
starting from "1" in chronological order.
Figure 7-41: Cine File Display
1
2
3
Open a multi-frame Cine in the thumbnail area.
Operation will switch to automatic playback state.
Multiple frame file
Single frame file
Loop marker
Chapter 7 - System Operation
173
Advertisement
Table of Contents
