Modify A Body Mark; Delete A Body Mark; Rotate The Probe Mark - Whale PE-12-025 User Manual

Chapter 7 - System Operation
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
7.12.3

Modify a body mark

STEP 1
STEP 2
STEP 3
7.12.4

Delete a body mark

Press the Page Erase on the alphanumeric keyboard. The body mark on the
screen can be deleted.
7.12.5

Rotate the probe mark

To rotate the probe mark, perform either of the following operations:
210
Move the cursor by scrolling the trackball to the first item of the
Body Mark soft menu, and then press Set. A list of the available body
mark libraries will pop up:
Figure 7-57: The list of available body mark libraries
Move the cursor to the desired body mark library and then press Set
key on the control panel to select. All mark items of this selected
body mark library will be displayed on the soft menu.
Move the cursor to the desired body mark and press Set key on the
control panel. The body mark with a Probe marker is displayed on
the right corner of the imaging area.
Adjust the position of the probe marker by scrolling the trackball
and press Set key on the control panel.
Select Rotate Probe in the main menu to change the probe marker
orientation and press Set key on the control panel.
Press Body Mark key on the control panel to activate the Body Mark
function.
Using the trackball, adjust the position of the probe marker and
press Set key on the control panel.
Select Rotate Probe in the main menu to select the probe marker
orientation and press Set key on the control panel.
Click Rotate Probe on the main menu.
Rotate the Multi-function knob on the control panel.
Portable Ultrasound Diagnostic Scanner User Manual
Body Mark