Whale PE-12-025 User Manual page 166

Chapter 7 - System Operation
Other Controls on The Split Screen
Determine the current imaging mode being one of 2D or Color mode. The
following controls are responsible for the regulating the corresponding
mode.
Table 7-44: Other Controls on The Split Screen
Parameter
Gain
TGC
Depth
1/2/4
Update/Menu
Alt
Using The Split Screen
In 2D/Color/Power/DPDI/TVI//EI /SRI mode, press 1/2/4 key on the control
panel to activate the Split Screen. Press Update/Menu key on the control
panel to switch the active window.
Optimizing The Split Screen
Determine the current imaging mode being one of 2D or Color mode. The
optimization refers to the corresponding mode (2D Mode/Color Mode/Pow-
er Mode/DPDI Mode/TVI Mode/EI Mode/SRI Mode).
166
Description
Turn the gain knob to adjust the overall brightness of the
image. Turn clockwise to make the image brighter, and
turn counterclockwise to make darker.
Use the TGC control sliders to adjust the brightness at the
different depth. Move the slider left to decrease the
brightness at the corresponding depth; Move the slider
right to increase the brightness at the corresponding
depth.
Flip the Depth knob to adjust the range of scan depth. Flip
the downwards to make the range of view larger; and flip
the upwards to make the range of view smaller.
Enables multiple image display windows in which four
images can be viewed simultaneously.
Switches the active window.
Display more Main menu controls: DisFormatTwoB, TVI
(phased array probe), EI (linear array probe and convex
array probe), SRI (phased array probe).
Portable Ultrasound Diagnostic Scanner User Manual
Imaging Mode