Table of Contents
Advertisement
Chapter 7 - System Operation
7.15.3.2
Setup of the DICOM server in the scanner's Preset window
DICOM dataflow selection
STEP 1
STEP 2
DICOM devices configuration
Depending on the DICOM dataflow selected, one or several DICOM devices
may have to be configured.
STEP 1
260
Press Config-Diag key on the control panel, select the Patient cate-
gory, then select the DataFlow sub-group tab. The DataFlow preset
sheet will be displayed.
Figure 7-90: The DataFlow Preset Sheet
Select the DICOM dataflow to configure in the Name pull-down
menu. The DICOM server dataflow supported are: Local - Local/ Di-
com Storage; Worklist - Local; Worklist - Local/ Dicom Storage.
Select a DICOM device in the Selected devices pane and click Prop-
erties button.
Portable Ultrasound Diagnostic Scanner User Manual
DICOM
Advertisement
Table of Contents
