Store And View A Cine File - Whale PE-12-025 User Manual

Chapter 7 - System Operation
To view a cine loop automatically
STEP 1
STEP 2
STEP 3
STEP 4
Exit cine loop mode
There are two ways to exit cine loop mode:
7.5.6

Store and view a cine file

Cine file storage can be divided into single-frame storage and multi-frame
storage.
Images and cine-loops that are stored during a current examination are dis-
played as thumbnails on the clipboard. When an image is stored, all the ad-
ditional information that is displayed is saved with it.
To store single-frame cine file
STEP 1
STEP 2
STEP 3
STEP 4
172
Press Freeze key on the control panel to start the Cine mode.
Cine icon shows the current total number of frames stored, Frame
indicator stays in the last frame. Cine mode main menu appears; you
can adjust the playback speed, starting and ending position and so
on.
After selecting Cine Loop, Cine automatically playback from the first
frame. At the same time Frame indicator continuous scrolls, indicat-
ing the location of the currently active frame, and the Frame counter
will update the active frame number.
Select cine loop again, or scroll the trackball, or press 2D Freeze key
on the control panel will stop the automatic cine playback. And the
Frame indicator stays on the current frame.
Press Freeze key on the control to unfreeze the image, exit cine loop
mode and return to the real-time imaging;
Press the imaging mode keys (B, M, CFM, PW, CW, whether the key is
valid or not depending on the imaging before freezing) on the control
panel to get into the corresponding mode.
Press Freeze key on the control panel to start the cine loop mode or
open a multi-frame Cine files in the thumbnail area.
Scroll the trackball to select a single image to be stored.
Press Store key on the control panel to save a single image.
The image is stored and a thumbnail is displayed on the clipboard.
A serial number is assigned to each thumbnail, start from "1" in
chronological order.
Portable Ultrasound Diagnostic Scanner User Manual
Cine Loop