Table of Contents
Advertisement
Worksheet
To select the type of value
STEP 1
STEP 2
STEP 3
STEP 4
To change a value manually
Individual measured values can be manually changed using the alphanu-
meric keyboard.
To manually change a value
STEP 1
STEP 2
STEP 3
To restore automatic calculation
STEP 1
STEP 2
STEP 3
To delete a value / parameter
STEP 1
STEP 2
STEP 3
STEP 4
Rev 1.00
Figure 7-53: Type Of Value
Trackball to the relevant cell in the Method column.
Press Set key. A pop-up menu is displayed showing the different op-
tions available.
Trackball to the required option.
Press Set key. The value is updated accordingly.
Trackball to the value that is to be changed.
Press Set key.
Use the alphanumeric keyboard to enter the new value.
Trackball to the relevant cell in the Method column.
Press Set key. A pop-up menu is displayed showing the different cal-
culation options available.
Press Set key. The value is re-calculated according the method se-
lected.
Trackball to the measurement value to delete.
Select Delete in the main menu, and then the value is deleted.
Delete all values of the parameter, and then the parameter is delet-
ed.
Select Clear in the main menu to delete all Parameters and their val-
ues.
Chapter 7 - System Operation
203
Advertisement
Table of Contents
