Table of Contents
Advertisement
Chapter 7 - System Operation
7.4.2
Panoramic Imaging Mode
Panoramic Imaging Mode Overview
Panoramic Imaging mode generates a two-dimensional image by rendering
and merging continuous data acquired by the linear movement of the
probe. It is used to observe and measure the overall structure. Only the lin-
ear array probe has this mode.
1
3
5
7
Panoramic Imaging Mode Main Menu Controls
Table 7-4: Panoramic Imaging Mode Main Menu Controls
Parameter
Focus Pos.
122
Use the Freq. (decrement frequency) to increase penetration.
Use the Width to provide a greater field of view.
Figure 7-23: Panoramic Imaging Screen
Probe orientation marker
Focus marker
Depth Scale
Panoramic Imaging Mode Main menu
Description
Use the Focus control to center the focal point(s) on the
region of interest. Along the entire depth, the focused
position has the most optimal signal strength and resolu-
tion. Moving the focus position will improve correspond-
ing positional signal.
2
Gray bar
4
Panoramic Imaging Mode parameters window
6
Panoramic Imaging Mode Soft menu
Portable Ultrasound Diagnostic Scanner User Manual
Imaging Mode
Advertisement
Table of Contents
