Whale PE-12-025 User Manual page 190

Chapter 7 - System Operation
STEP 5
STEP 6
Skip to the next measurement automatically
In the Preset Dialogue window, select Meas/Text->Meas Parameters, user
can set the Measure Sequence. If the Next option is selected, the cursor will
be skip to the next measurement after each measurement.
STEP 1
STEP 2
The worksheet function enables the user to review, edit, delete or print data
to a report. All measurements and calculations taken during the examina-
tion can be viewed at any time using the worksheet.
All special measurements are basically the same operation, Use the follow-
ing measurement steps for the Cardiac Measurement as an example.
Cardiac Measurement
Cardiac measurements include general cardiac measurement and pediatric-
cardiac measurement. The measurements use the same step. Refer to gen-
eral cardiac measurements for measurement steps.
Preparations before measurement:
1
190
Press Set key on the control panel to activate the measurement tool.
The cursor will move back to the scanning window.
Perform the measurement. Completed measurements are marked
with a check mark after completion, and the next measurement on
the list is automatically selected.
Trackball to the desired measurement item.
Press Set key on the control panel to activate the measurement
item, complete the measurement on the image area. Then the next
measurement item will be selected automatically.
Figure 7-50: Display of a performed measurement
1 Performed measurement
2 Next measurement is selected automatically
Check whether the probe is suitable for the current measurement item.
Portable Ultrasound Diagnostic Scanner User Manual
Measurement