Battery Replacement; Led Lights - Whale PE-12-025 User Manual

Chapter 4 - Start-up
Table 4-2: Battery Status Icons
Status Icon
Users can click the status icon to check the power level of the battery.
4.2.4

Battery Replacement

To replace the battery:
STEP 1
STEP 2
STEP 3
Two types of rechargeable lithium-ion smart batteries are available:
Note: Two types of batteries are delivered randomly with the unit.
Discharge Temperature Range: -20℃ ~ 60℃
Maximum Charging Voltage: 16.8 V
4.2.5

LED Lights

There are two LEDs to indicate the status of the system.
Table 4-3: LED Lights
LED Light
LED #1
LED #2
52
Status Description
No AC power and the battery is in use. Battery is almost empty
(0%~25%).
Slide back the battery lock and hold.
Pull out the battery pack from the console.
Install the new battery.
Battery 1: 14.4 V, 9000 mAh, 129.6 Wh
Battery 2: 14.4 V, 10 Ah, 144 Wh
Function Description
Indicates the AC power sta-
tus.
The system power is On
when this LED is lit.
Indicate the battery status.
Portable Ultrasound Diagnostic Scanner User Manual
Unit Connection
Color
Yellow-green
Yellow- green and Red
When the battery is
charged, the LED is yellow-
green.
When the battery is low,
the LED is Red.