Report - Whale PE-12-025 User Manual

Chapter 7 - System Operation
STEP 4
STEP 5
STEP 6
Alternative 2:
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
7.2.3

Report

The Portable Ultrasound Diagnostic Scanner enables the creation of patient
and examination reports containing patient information, images, measure-
ments and analysis that were made during the examination. The layout of
the report is defined by generic templates delivered with the system. Saved
reports are read-only. Therefore it is recommended that the data be carefully
110
Click Save As button, the Save As window is displayed.
Figure 7-14: Save As Window
Modify the Save as type, there are three types: DICOM, AVI, JPG,
MP4, BMP. If you select DICOM, you can also modify Store settings.
Click OK button, a message box pops up to display the export sta-
tus. After some time, the Save Successfully message is displayed.
Click Yes button to close the message box.
Insert a removable disk into the USB port of the unit.
Use the trackball and Set key to select a image/cine on the clip-
board.
Press Trackball key to active the cursor. Press Update/Menu key to
display the System Menu window.
Select Save As on the System Menu window. The Save As window
is displayed.
Modify the Save as type, there are three types: DICOM, AVI, IMAGE.
If you select DICOM, you can also modify Store settings.
Click OK button, a message box pops up to display the export sta-
tus. After some time, the Save Successfully message is displayed.
Click Yes button to close the message box.
Portable Ultrasound Diagnostic Scanner User Manual
Patient Management