Mitsubishi Eclipse 1990 Service Manual page 1879

Front of vehicle
Cover
Door inside handle
l i n
Front of vehicle
BODY
R E M O V A L
(A, CLIP REMOVAL
Remove the clip by using a shop
the regulator handle.
0 0 0 0 0 1 2 4
Remove the cover mounting screw and
by pushing it toward the front of the vehicle to 'remove the
clamp section from the door inside handle.
section
After removing the trim mounting screws and clips, push
the trim to remove it from the door
clips.
INSTALLATION SERVICE
(1) Install the escutcheon and the clip to the regulator handle.
e
(2) Fully close the door glass, and install the regulator handle
so that
TSB Revision
Door
COVER REMOVAL
DOOR TRIM REMOVAL
REGULATOR
faces as shown in the illustration.
it
and then
cover
weatherstnp
INSTALLATION
,