Mitsubishi Eclipse 1990 Service Manual page 1916

TROUBLE SYMPTOM INSPECTION CHART
does not
A Operation
when the convertible
Convertible top switch continuity
check (Refer to
top bypass switch
OK
OK
Measure at the convertible top control
module connector
Disconnect the connector and
measure at the harness side
Voltage between terminal (12) and
ground
OK: Battery positive voltage
OK
Measure at the convertible top control
module connector
.
Continuity between terminal
,
Check the harness between the con-
vertible top control module and convert-
ible top bypass switch and between the
convertible top control module and
BODY Electric Convertible
take place when the convertible top switch is set
top bypass switch is set to
NG
and
TSB Revision
OFF.
link (3) and convertible top control
module. Repair, if necessary.
trouble symptom ,
Check the harness 'between
convertible top control module and
ground. Repair, if necessary.
, .
open or
,
,