Mitsubishi Eclipse 1990 Service Manual page 1927

CONVERTIBLE TOP SWITCH
REMOVAL A N D I N S T A L L A T I O N
NOTE
indicates the metal clip position.
Removal steps
1. Stopper
2. Center air outlet assembly
3. Convertible top switch
BODY
Electric Convertible Top
REMOVAL SERVICE POINT
Using the pry tool, carefully pry the assembly out of the
INSTALLATION SERVICE POINT
CENTER AIR OUTLET ASSEMBLY
INSTALLATION
(1) Turn the cool air bypass lever of the center air outlet
fully downward.
(2) Pull the cool air bypass damper lever on the heater unit
side fully toward you, then attach the cable to the pin
of the
(3) Push the outer cable in the direction of the arrow so
there is no looseness,
TSB Revision
AIR OUTLET ASSEMBLY REMOVAL
then secure it with the clip.
42620240012