Table of Contents
Advertisement
Front axle and reduction gear oil level (4WD)
1. Move the machine to a level and firm ground.
2. Lower the loader attachment to the ground.
3. Place the backhoe attachment in the road travel posi-
tion.
4. Place the direction-of-travel lever and gearshift lever in
the neutral position.
5. Engage the parking brake.
6. Stop the engine and remove the starter switch key.
Axle oil level
1. Unscrew and remove the plug (1).
2. Check the level by checking if the oil reaches the height
of the plug hole.
3. If necessary, add additional oil.
4. Insert and tighten the plug (1).
Oil specification and capacities
Use P
T
REMIUM
RANSAXLE
an oil meeting the below standard: SAE 80W-140
Capacities: 4WD Differential: 6.5 L (6.9 US qt)
7 - MAINTENANCE
O
80W-140 ( MAT 3510) or
IL
7-65
1
LEEN11T0375AA
Advertisement
Table of Contents
Troubleshooting
