Front Controls - New Holland B95C Original Instructions Manual

Front controls

(1) Four-Wheel Drive (4WD) switch (optional)
Two function switch:
• Power shuttle machines, – Press the blank side to switch for rear wheel drive and braking on rear
wheels (for all gears) (control lamp off).
• Powershift machines – Press the blank side to switch for rear wheel drive with braking only on rear
wheels (only in first and second gear) (control lamp off); four wheel drive and braking (in third and
fourth gear) (control lamp on).
• Press the emblem side of the switch for Four-Wheel Drive (4WD) and braking on all four wheels
(control lamp on).
NOTICE: To prevent undue tire wear when traveling on public highways or on any hard surface, disengage 4WD,
particularly in 3rd or 4th gear.
(2) Hand-held auxiliary hydraulic attachment switch (Optional)
This two position switch:
1. Press the blank side of the switch to turn OFF or disable the auxiliary hydraulics (control lamp OFF).
2. Press the emblem side to turn ON or enable the auxiliary hydraulic attachments (control lamp ON)..
(3) Blank
(4) Loader attachment lock valve switch (optional)
This two position switch:
1. First position (control lamp off) condition with blocked valves.
2. Second position (control lamp on), by pressing the side with the symbol, the valves are released.
3 - CONTROLS AND INSTRUMENTS
LEEN11T0010FA
3-10
1