Power Shuttle Transmission - Oil Change - New Holland B95C Original Instructions Manual

Power shuttle transmission - Oil change

1. Move the machine to a level and firm surface.
2. Raise the loader attachment and install the safety sup-
port strut.
3. Place the backhoe attachment in the road travel posi-
tion.
4. Place the direction-of-travel lever and gearshift lever in
the neutral position.
5. Engage the parking brake.
6. Stop the engine and remove the starter switch key.
7. Release any possible residual pressure from the hy-
draulic system by moving the control levers in all direc-
tions.
8. Unlock, open and raise the engine hood.
9. Remove the dipstick (1).
NOTE: Change the oil while the transmission is still warm;
the oil will flow more easily.
10. Place a container with suitable capacity under the
transmission drain plug (2).
11. Loosen and remove the drain plug (2).
12. Let the transmission oil drain completely.
NOTE: Change the transmission oil filter at this time.
13. Install the drain plug (2) and retighten it.
14. Fill the transmission with H
O - P through the dipstick hole.
IL REMIUM
15. Reinstall the dipstick (1).
16. Check the oil level by means of the dipstick, and add
additional oil if necessary.
17. Drive the machine for a few minutes in first and second
gear, and then stop the machine with engine running,
and the direction-of-travel lever and the transmission
gearshift in the neutral position.
7 - MAINTENANCE
T
YDRAULIC RANSMISSION
7-100
1
LEEN11T0356AA
2
LEEN12T0690AA