Fuel tank - Drain fluid
1. Move the machine to a level and firm surface.
2. Lower the loader attachment to the ground.
3. Place the backhoe attachment in the road travel posi-
tion.
4. Place the direction-of-travel lever and gearshift lever in
the neutral position.
5. Engage the parking brake.
6. Stop the engine and remove the starter switch key.
7. Release any possible residual hydraulic pressure by
moving the control levers in all directions.
8. Place a container of the appropriate capacity under the
fuel tank located on the left side of the machine.
9. Remove the drain plug from the fuel tank and drain the
contaminated fuel and sediment from the tank.
10. When clean fuel flows from the drain, reinstall and
secure the drain plug.
11. Check the fuel level and refill the tank if necessary.
7 - MAINTENANCE
7-61
1
RAIL15TLB0037AA
2
RAIL15TLB0035AA