Fuel pre-filter - draining condensation
WARNING
Fire hazard! Avoid injury and/or machine damage!
During maintenance activities, make sure that the high-pressure fuel lines are not damaged. A fuel
leak from the high-pressure fuel lines can cause an accident and/or serious personal injury. If the fuel
lines are damaged, contact your dealer immediately.
Failure to comply could result in death or serious injury.
1. Move the machine to a level and firm surface.
2. Raise the loader attachment and install the safety sup-
port strut.
3. Place the backhoe attachment in the road travel posi-
tion.
4. Place the direction-of-travel lever and gearshift lever in
the neutral position.
5. Engage the parking brake.
6. Stop the engine and remove the starter switch key.
7. Release any possible residual pressure from the hy-
draulic system by moving the control levers in all direc-
tions.
8. Wait the time necessary to allow the engine and the fuel
system to cool down.
9. Place a suitable container under the machine.
10. Unlock and raise the engine hood.
11. Locate the fuel filter (1) to drain the water and sed-
iments through the drain valve on the bottom of the
filter.
7 - MAINTENANCE
7-53
W1335A
1
RAIL15TLB0027AA