Recommended Engine Oil For Operating Temperature Ranges - New Holland B95C Original Instructions Manual

Recommended engine oil for operating temperature ranges

NEW HOLLAND CONSTRUCTION prefers the use of E
You may also use CI-4 E
You may use other engine oils if the engine oils meet API CJ-4 performance requirements.
NEW HOLLAND CONSTRUCTION engine oils exceed API CJ-4 performance requirements.
See the following chart for recommended viscosity at varying ambient air temperature ranges.
NOTE: Do not put performance additives or other oil additive products in the engine crankcase. See dealer for ap-
proved engine oil additives, engine oil analysis test package information.
Recommended viscosity grades at varying ambient temperature limits
(H)
(H)
-40 °C -30 °C
-40 °F -22 °F
(H) = Engine oil pan or coolant block heater recommended in this range
Engine oil and filter service intervals
NEW HOLLAND CONSTRUCTION develops the oil/filter change intervals given in this manual from tests with NEW
HOLLAND CONSTRUCTION lubricants/filters.
Engine oil and filter service interval recommendations are based on type of engine oil, oil filter used, sulfur, Bio-diesel
content of diesel fuel. See diesel fuel recommendations for the approved Diesel fuel sulfur content, Bio-Diesel blends,
and fuel specification information.
Always change engine oil and oil filter at the below service intervals or annually whichever comes first
Engine Oil which meets MAT3571 specification E
Engine Oil which meets MAT3572 specification CI-4 E
Other oils which meet API CJ-4 specifications
O in your engine.
NGINE IL
0W-40 CJ-4 to CNH MAT3571
(H)
(H)
(H)
(H)
-20 °C -10 °C
-4 °F 14 °F
Engine oil and filter service intervals
7 - MAINTENANCE
O SBL CJ-4 engine oil in your engine.
NGINE IL
0W-40 API CJ-4
10W-40 CJ-4 to CNH MAT3571
10W-40 API CJ-4
15W-40 CJ-4 to CNH MAT3572
15W-40 API CJ-4
0 °C 10 °C
32 °F 50 °F
O SBL CJ-4
NGINE IL
O
NGINE IL
7-17
20 °C 30 °C
68 °F 86 °F 104 °F
40 °C 50 °C
122 °F
600 hours
500 hours
300 hours