Alarm(S); Display Screen Messages - New Holland B95C Original Instructions Manual

ALARM(S)

Display screen messages

Display
Warning machine fault is present
Stop the machine a critical error is present.
Engine de-rate
Parking brake not released
Engine oil pressure too low
Hydraulic oil filter blocked
Alternator charging failure
Engine air filter blocked
Transmission oil pressure too high
Transmission oil temperature too high
Engine coolant temperature too high
Low fuel
Water in fuel
Low Diesel Exhaust Fluid (DEF)/AdBlue® level
Power Lift™ is not available for use.
8 - TROUBLESHOOTING
Description
Contact your dealer for assistance.
Contact your dealer for assistance
Contact your dealer for assistance.
Disengage the parking brake.
Check the engine oil level. If level is okay and
the warning continues, contact your dealer for
assistance.
Replace the oil filter. See "Hydraulic filter (s)" 7-27
Contact your dealer for assistance.
Clean or replace the engine air filters. See "Engine
air filters" 7-25.
Contact your dealer for assistance.
Check the transmission fluid level. If level is okay
and the warning continues, contact your dealer for
assistance.
Check the coolant level. If level is okay and
the warning continues, contact your dealer for
assistance.
Fill the fuel tank with ASTM D975 G
S15.
Check the water separator. See 7-29.
Fill the SCR tank with DEF/AdBlue®.
Make sure the engine is warm, the directional control
lever is in Neutral, and the operator seat is locked in
the backhoe operation position. If problem continues
contact your dealer for assistance.
8-22
Action
N . 2-D
RADE O