Alternator - Check - New Holland B95C Original Instructions Manual

Alternator — Check
1. Move the machine to a level and firm surface.
2. Raise the loader attachment and install the safety sup-
port strut.
3. Place the backhoe attachment in the road travel posi-
tion.
4. Place the direction-of-travel lever and gearshift lever in
the neutral position.
5. Engage the parking brake.
6. Stop the engine and remove the starter switch key.
7. Wait for the machine to cool down.
8. Unlock and raise the engine hood.
NOTE: Make sure the terminal protectors are correctly installed.
NOTICE: Do not use steam cleaning devices nor cleaning solvents to clean the alternator.
9. Check the alternator (1) for loose external wire connec-
tions, and listen for excessive noise during machine op-
eration.
10. If alternator operation is in question, have it checked
by your Authorized Dealer.
11. Lower and lock the engine hood.
12. Remove the safety support strut and lower the loader
attachment.
7 - MAINTENANCE
7-45
1
RAIL15TLB0040AA