Battery Removal And Installation - New Holland B95C Original Instructions Manual

Battery removal and installation

WARNING
Electrical shock hazard!
Do not reverse battery terminals. Connect positive cable ends to positive terminals (+) and negative
cable ends to negative terminals (-).
Failure to comply could result in death or serious injury.
WARNING
Battery gas can explode!
To prevent an explosion: 1. Always disconnect the negative (-) battery cable first. 2. Always connect
the negative (-) battery cable last. 3. Do not short circuit the battery posts with metal objects. 4. Do
not weld, grind, or smoke near a battery.
Failure to comply could result in death or serious injury.
1. Move the machine to a level and firm surface.
2. Lower the loader attachment to the ground.
3. Place the backhoe attachment in the road travel posi-
tion.
4. Place the direction-of-travel lever and gearshift lever in
the neutral position.
5. Engage the parking brake.
6. Stop the engine and remove the starter switch key.
7. Place the battery switch in the OFF position.
NOTE: Wait at least 60 seconds after key off before turning
battery switch to the off position. This allows the machine
controllers to shutdown properly.
8. Remove the fasteners (1) and the battery cover (2).
7 - MAINTENANCE
7-150
W0262A
W0011A
1
RAIL15TLB0073AA