10 - ACCESSORIES
10 -
ACCESSORIES###_10_###
Mechanical loader bucket quick coupler
It is possible to install a quick coupler (1) for the loader
bucket on the loader attachment, using the standard
mounting pins (2).
Quick removal and installation of the loader
bucket
Make sure the bucket to be installed is in a safe area, on
a level and firm ground and with the upper pins in place.
Use the control lever (dumping position) to bring the quick
coupler hooks under the bucket pins (3).
Use the control lever (digging position) to swing the bucket
down onto the lower part of the quick coupler.
Stop the engine and remove the starter switch key.
Install the pins (4) and retaining hardware.
NOTICE: Make sure the loader bucket is correctly in-
stalled with all its pins and locking rings before using the
loader.
1
MOLI12LBB0507BB
10-1