Engine oil level — Check
1. Move the machine to a level and firm surface.
2. Raise the loader attachment and install the safety sup-
port strut.
3. Place the backhoe attachment in the road travel posi-
tion.
4. Place the direction-of-travel lever and gearshift lever in
the neutral position.
5. Engage the parking brake.
6. Stop the engine and remove the starter switch key.
7. Release any possible residual pressure from the hy-
draulic system by moving the control levers in all direc-
tions.
8. Unlock and open the engine hood.
9. Remove the dipstick (1), wipe it with a clean cloth and
completely insert and then remove the dipstick again.
10. Check to the oil level on the dipstick.
7 - MAINTENANCE
7-41
1
RAIL15TLB0025AA
2
LEEN11T0361AA