Engine cooling system — Check
Cooling system lines - Check
1. Move the machine to a level and firm surface.
2. Raise the loader attachment and install the safety sup-
port strut.
3. Place the backhoe attachment in the road travel posi-
tion.
4. Place the direction-of-travel lever and gearshift lever in
the neutral position.
5. Engage the parking brake.
6. Stop the engine and remove the starter switch key.
7. Release any possible residual hydraulic pressure by
moving the control levers in all directions.
8. Unlock and raise the engine hood.
9. Check all of the engine cooling system lines for possible
leaks.
10. Check the tightness of the collars, fittings, hoses and
pipes of the engine cooling system.
11. Repair any leaks or contact your local authorized
dealer for machine service.
12. Lower and lock the engine hood.
13. Remove the safety support strut and lower the loader
attachment.
7 - MAINTENANCE
7-60