Hydraulic oil
1. Move the machine to a level and firm surface.
2. Lower the loader attachment to the ground.
3. Place the backhoe attachment in the road travel posi-
tion.
4. Place the direction-of-travel lever and gearshift lever in
the neutral position.
5. Engage the parking brake.
6. Stop the engine and remove the starter switch key.
7. Release any possible residual pressure from the hy-
draulic system by moving the control levers in all direc-
tions.
Draining
8. Place a container with suitable capacity under the hy-
draulic oil tank (1).
NOTE: When draining, the hydraulic oil must be at operat-
ing temperature.
9. Clean the area around the hydraulic oil tank breather/
filler cap (2), and then loosen and remove the breather/
filler cap.
7 - MAINTENANCE
7-97
1
RAIL15TLB0039AA
2
RAIL15TLB0083AA