Every 10 Hours; Checks At Start-Up And Before Each Workshift (10 Hours) - New Holland B95C Original Instructions Manual

Every 10 hours

Checks at start-up and before each workshift (10 hours)

Machine - General inspection
Before using the machine, it is recommended to per-
form a general inspection.
Externally check the machine and its working attach-
ments, checking for possible breaks or damage of
the components or the structure. Should problems be
detected, contact an authorized workshop to have the
necessary repairs carried out.
Replace the damaged or excessively worn parts with
original spare parts.
Keep the machine clean by daily removing the dirt ac-
cumulated while working.
Service brake
Check the operation of the service (pedal) brakes on a
hard level surface.
1. Make sure the area is clear of other workers or by-
standers.
2. Lock both pedals together with the brake pedal lock.
3. Shift the transmission to 2nd gear.
4. Drive the machine forward at full throttle.
5. When the machine is moving at full speed, remove your
foot from the throttle and stop the machine.
6. The machine must stop smoothly in a straight line and
the brake pedal effort must feel firm.
NOTICE: If the machine does not stop in a straight line or
if the brake pedal effort feels soft, contact your dealer for
service.
Parking brake
The parking brake is not serviceable. If a reduction of
the braking action is detected, contact the Service De-
partment.
Lights
Before using the machine, it is recommended to check
that all lights are clean and correctly operating.
Functionality of controls and lights
Before using the machine, it is recommended to check
that all controls, instruments and lamps in the operator's
compartment are correctly operating.
Should problems be detected, stop the engine and find
the cause of the anomaly.
7 - MAINTENANCE
7-37