Table of Contents
Advertisement
Loader digging force
Transmission disconnect button
Press the transmission disconnect button to increase engine speed and supply the loader with more hydraulic oil for
greater loader power and faster control function.
Press and hold the transmission disconnect button on the
back of the loader control lever, the transmission will dis-
engage from the drive wheels. Release the transmission
disconnect button to engage the transmission power.
The machine can move freely when the transmission dis-
connect button is pressed. Use the service brake to stop
the machine.
Transmission kickdown
NOTE: Only available on machines with a Powershift transmission.
Kickdown is used to increase loader breakout force. The kickdown control lets the operator temporarily switch from
second gear to first gear without changing the gear selection control setting.
NOTICE: This feature will only activate when second gear is selected in manual shift mode, or when the transmission
is actually in second gear in auto shift mode.
Kickdown button on the directional control lever.
1. Press the button at the end on the directional control
lever to shift from second to first gear.
NOTE: The operator may experience a short pause or
delay before the gear shift occurs.
2. Press the button again to shift up to second gear.
6 - WORKING OPERATIONS
6-17
1
RAIL18TLB0403BA
2
LEEN11T0204AA
Advertisement
Table of Contents
Troubleshooting
