Transmission Controls - New Holland B95C Original Instructions Manual

Transmission controls

WARNING
Loss of control hazard!
To prevent inadvertent machine movement, take care to avoid accidental contact with the gearshift
levers. Always stop the engine, firmly apply the parking brake, and place all gearshift levers in neutral
before leaving the machine.
Failure to comply could result in death or serious injury.
Power shuttle
(1) Gearshift lever: It is possible to select four forward and four rearward travel speeds.
(2) Transmission disconnect button (on gearshift lever): Press and hold when changing gears.
(3) Direction control lever: This lever controls the direction the machine will travel.
NEUTRAL (N) position, FORWARD (F) travel, or REVERSE (R) travel.
NOTE: In reverse gear an audible alarm device sounds.
(4) Horn button: Sounds the horn.
(5) Transmission disconnect button (on the backside of the loader control lever): Press and hold, increase the
engine speed will provide more power to the loader.
3 - CONTROLS AND INSTRUMENTS
RAIL18TLB0066FA
3-14
1
W0130A