Glide Ride™ - Two-Wheel Drive (2Wd) Only - New Holland B95C Original Instructions Manual

Glide Ride™ - Two-Wheel Drive (2WD) only
WARNING
Unexpected machine movement!
Stand clear of the loader arms. If you enable Glide Ride™ or Auto-Glide Ride™ control with the key
switch in the ON or ACC position, the loader arms can drop slightly due to the hydraulic accumulator.
Failure to comply could result in death or serious injury.
WARNING
Unexpected machine movement!
Stand clear of the machine. If you activate the Glide Ride™ or Auto-Glide Ride™ control while the
loader arm applies down force, the machine or load may lower unexpectedly. For example, do not
activate these controls while the loader arm supports or lifts the machine front end off the ground.
Failure to comply could result in death or serious injury.
Glide Ride™ is an optional feature for machines with Two-Wheel Drive (2WD). When Glide Ride™ is activated, the
loader down pressure is limited to the weight of the loader and the attachment (bucket). The weight of the loader
attachment is hydraulically cushioned during transport.
NOTE: Do not use Glide Ride™ when the bucket is used in fine grading operations or when precision placement of
a load suspended from the bucket or other attachment is required.
Before activating Glide Ride™ perform the following actions:
• Place the operator seat in the forward driving position.
• Place the hand throttle control at low idle.
• Only use the foot throttle.
• Make sure that the loader arm is not applying down force.
Activate Glide Ride™:
1. Lower the loader bucket to or near the ground line.
2. Press the emblem end of the rocker switch to enable
Glide Ride™. The emblem illuminates.
3. Disable Glide Ride™, press the blank side of the
rocker switch. The emblem no longer illuminates.
4 - OPERATING INSTRUCTIONS
4-24
W1458C
W1459B
1
LEEN11T0079AA