Operator's Seat - New Holland B95C Original Instructions Manual

OPERATOR'S SEAT

Operator's seat
To operate the machine correctly with maximum efficiency
and comfort, check that the operator's seat and its adjust-
ment controls are in good condition and then adjust the
seat to suit the operator's size and weight.
CAUTION
Avoid injury!
Before operating the machine, and whenever
a new operator takes over, adjust the seat sus-
pension to suit the operator's specific weight.
Failure to comply could result in minor or
moderate injury.
WARNING
Roll-over hazard!
Securely fasten the seat belt. Your machine
is equipped with a Roll-Over Protective Struc-
ture (ROPS) cab for your protection. The seat
belt can help ensure your safety if it is prop-
erly used and maintained. Never wear a seat
belt loosely or with slack in the belt system.
Failure to comply could result in death or se-
rious injury.
NOTE: The seat complies with standard ISO 7096:2000
class EM5.
Standard Seat – mechanical suspension
Seat belt
Attach the seat belt, pull and insert the buckle (1) into the
socket (4).
Release the belt, press the button on the socket (3) and
retract the seat belt to the resting position.
Armrest angle adjustment
Rotate the knob (2) to set the armrest position incline
when in a down position. You may rotate either armrest
up or down by lifting or pushing on the armrest.
3 - CONTROLS AND INSTRUMENTS
C0093A
W0376A
3-4
1
MOLI12LBB0154AA
2
RAIL18TLB0198BA