Engine hood
NOTICE: It is essential to install the loader attachment
support strut before any servicing work is done on the
engine.
Open the engine hood:
1. Insert the key (1) and turn counter-clockwise.
2. Push the key slot on the engine latch to release the
lock (2).
3. Use the engine hood lift handles (4), lift, and rotate the
hood (3) into the fully open position.
NOTICE: Before undertaking any road travel, make sure
the engine guard is properly locked.
Close and lock the engine hood (figures in reverse order):
1. Push the hood down in to the closed position.
2. Push the engine latch (2) down into the lock position.
3. Insert the key (1) and turn clockwise.
7 - MAINTENANCE
7-9
1
RAIL15TLB0084AA
2
RAIL15TLB0086AA
3
LEEN11T0072AA