Rear axle
Rear axle - Oil change
1. Move the machine to a level and firm surface.
2. Lower the loader attachment to the ground.
3. Place the backhoe attachment in the road travel posi-
tion.
4. Place the direction-of-travel lever and the gearshift
lever in the neutral position.
5. Engage the parking brake.
6. Stop the engine and remove the starter switch key.
7. Place a container with suitable capacity under the drain
plug (1).
8. Loosen and remove the drain plug (1) and the fill and
level check plug (2).
9. Wait for the oil to drain completely from the axle through
the drain plug hole of the axle (1).
10. When the oil has completely drained, install the drain
plug (1).
11. Fill the axle with P
through the hole of the fill and level check plug (2) until
the level reaches the hole.
12. Install and retighten the plug (2).
Oil specification and capacities
Use P
T
REMIUM
RANSAXLE
21.2 L (22.4 US qt)
T
O
REMIUM
RANSAXLE
IL
O
80W-140.
IL
7 - MAINTENANCE
80W-140
Capacity
7-110
1
LEEN11T0386AA