Rear axle breather
Rear axle breather valve - Cleaning
1. Move the machine to a level and firm surface.
2. Lower the loader attachment to the ground.
3. Place the backhoe attachment in the road travel posi-
tion.
4. Place the direction-of-travel lever and gearshift lever in
neutral position.
5. Immobilize the machine by means of the parking brake.
6. Stop the engine and remove the starter switch key.
7. Clean the area around the breather valve (1).
8. Loosen and remove the breather valve.
9. Clean the breather valve (1) with a detergent solution.
NOTICE: Follow the instructions for the detergent solution.
10. Carefully dry the breather valve (1) with compressed
air.
11. Reinstall the breather valve (1).
7 - MAINTENANCE
7-69
1
LEEN11T0386AA