Lifting Loads With The Loader Attachment - New Holland B95C Original Instructions Manual

Lifting loads with the loader attachment

WARNING
Heavy object!
ALWAYS use adequate lifting equipment
(heavy-duty hoist, loader, or forklift) to lift the
component.
Failure to comply could result in death or se-
rious injury.
Loader bucket - with lifting ring
The lifting ring is the only point to which loads may be
attached on the loader bucket. The bucket must also be
in dumping position.
Loader bucket - without lifting ring
If the loader bucket is not equipped with a factory fitted
lifting ring, consult your dealer.
Use the controls gradually so as to move the attachment
accurately.
The maximum authorized load must not exceed 1000 kg
(2205 lb).
Steady the load a few centimeters above the ground so it
is perfectly balanced before carrying out the lifting opera-
tion.
Do not allow any person within the working range of the
machine.
When moving with a load, be sure to:
• Keep the load as close as possible to the ground and
to the machine.
• Always travel at low speed.
• Operate the controls smoothly to obtain precise move-
ments and travel.
• In order to reduce the load's oscillation, avoid slinging
it with too long ropes and/or chains.
6 - WORKING OPERATIONS
W0101A
6-27
1
LEEN12T0660AA
2
LEEN12T0661AA