Windshield washer fluid level — Check
1. Move the machine to a level and firm surface.
2. Make sure the machine is in a safe condition.
3. Stop the engine and remove the starter switch key.
4. To check the level of the windshield wiper/washer fluid,
open the reservoir cap (1) check the windshield wiper/
washer fluid.
5. If the wiper/washer fluid is not visible, then refill the
reservoir.
NOTICE: The windshield wiper motor is gravity-fed. Do not
remove the rubber tube as damage can be caused if liquid
gets into the motor.
Fluid specification and capacity
Use C
ONCENTRATED
screen washer fluid approved by NEW HOLLAND
CONSTRUCTION.
7 - MAINTENANCE
W
W
or a wind-
INDSCREEN
ASH
7-40
1
LEEN12T0570AA