Swing Lock - New Holland B95C Original Instructions Manual

Swing lock

Install the backhoe swing lock pin
Make sure the backhoe swing lock pin is in the LOCK
position whenever the backhoe is not in use. To install
the backhoe swing lock pin:
1. Place the seat in the backhoe operating position.
2. Center the backhoe over the rear of the machine.
3. Turn off the engine.
4. If applicable, open the rear window.
5. Remove the backhoe swing lock pin from the storage
location and place it in the LOCK position.
NOTE: View is from the operator seat facing the backhoe.
Remove the backhoe swing lock pin:
To remove the backhoe swing lock pin from the LOCK
position.
1. Turn off the machine.
2. Place the seat in the backhoe operating position.
3. If applicable, open the rear window.
4. Remove the backhoe swing lock pin from the LOCK
position and place it in the storage position.
NOTICE: After backhoe operations are complete make
sure that you put the backhoe in the stowed position with
the swing lock pin in the lock position.
NOTICE: Do NOT operate the machine if the backhoe
swing lock is missing or damaged. Before you operate
the machine, contact your dealer for a replacement.
6 - WORKING OPERATIONS
6-31
1
RAIL15TLB0255AA
2
RAIL16TLB0375BA