Passat 2011 ➤ , Passat Variant 2011 ➤
Brake systems - Edition 02.2014
– Remove bolts -1- to unbolt steering column.
– Place steering column carefully on trim and secure it.
Continuation for all vehicles
– Remove bolt -1- for brake pedal towards the left, while holding
the nut -arrow-.
– Remove brake pedal.
Installing
Install in reverse order. Note the following points:
– Connect brake pedal to brake servo
– Hook steering column into installation aid on mounting brack‐
et.
– Align steering column to mounting bracket.
In the process, the pins -arrows A- of mounting bracket must be
aligned with and inserted into the holes -arrows B- of the steering
column
The correct installation position of the steering column relative to
the mounting bracket is guaranteed only in this way.
Specified torque
Component
Brake pedal on mounting bracket
♦ Use new nut
4.5
Removing and installing mounting
bracket
⇒ "4.5.1 Removing and installing mounting bracket, LHD ",
page 67
66
Rep. gr.46 - Brakes - mechanism
⇒ page 63
.
Specified torque
25 Nm