Overview of this manual
About this manual
This manual contains instructions for:
Usage
This manual should be used during:
Who should read this manual?
This manual is intended for:
Prerequisites
Maintenance/repair/installation personnel working with an ABB Robot must:
Product manual scope
The manual covers covers all variants and designs of the IRB 140 type C. Some
variants and designs may have been removed from the business offer and are no
longer available for purchase.
Organization of chapters
The manual is organized in the following chapters:
Chapter
Safety, service
Installation and commis-
sioning
Maintenance
Repair
Product manual - IRB 140
3HAC027400-001 Revision: V
•
mechanical and electrical installation of the robot
•
maintenance of the robot
•
mechanical and electrical repair of the robot.
•
installation, from lifting the robot to its work site and securing it to the
foundation to making it ready for operation
•
maintenance work
•
repair work and calibration.
•
installation personnel
•
maintenance personnel
•
repair personnel.
•
be trained by ABB and have the required knowledge of mechanical and
electrical installation/repair/maintenance work.
Contents
Safety information that must be read through before performing
any installation or service work on robot. Contains general
safety aspects as well as more specific information about how
to avoid personal injuries and damage to the product.
Required information about lifting and installation of the robot.
Step-by-step procedures that describe how to perform mainten-
ance of the robot. Based on a maintenance schedule that may
be used in the work of planning periodical maintenance.
Step-by-step procedures that describe how to perform repair
activities of the robot. Based on available spare parts.
© Copyright 2004-2018 ABB. All rights reserved.
Overview of this manual
Continues on next page
9