Getting Online Help; Accessing Adaptec Disk Array Administrator - Adaptec DuraStor 7220SS User Manual

Getting Online Help

Online Help is available at any time from the Help menu. You can
also press F1 or select Help in a dialog box to display Online Help
specific to where you are on-screen.

Accessing Adaptec Disk Array Administrator

You can access Adaptec Disk Array Administrator using the
RS-232 serial port on the DuraStor 6200S RAID appliance. Use the
port associated with the controller you wish to access. Refer to the
DuraStor Installation and User's Guide for more information.
You must connect a computer with terminal emulator software,
such as HyperTerminal, to the serial port. You must use a straight-
through serial cable. You cannot use a null modem cable.
Note: If you are using HyperTerminal as your terminal
emulator software, you must be using HyperTerminal
Private Edition (HTPE) 6.3 for the up and down arrow
↑ ↓)
(
or
If you are not using HTPE 6.3, you can download it for free
at www.hilgraeve.com/htpe/index.html.
Configure the RS-232 port in your terminal emulator software
using the settings in
Table 1-1 RS-232 Port Configuration Settings
Setting
Terminal Emulation
Font
Translations
Columns
Set the communications parameters for the terminal emulator
software as shown in
keys to work.
Table 1-1.
Value
VT-100 or ANSI (for color support)
Terminal
None
80
Table 1-2.
Getting Started
1-2