Accessing The Cli; Accessing The Cli From The Ms-Dos Prompt; Accessing The Cli In Windows; Accessing Cli In Linux And Unix - Adaptec AAR-21610SA Reference Manual

Accessing the CLI

This section discusses accessing the CLI in various operating
systems.

Accessing the CLI from the MS-DOS Prompt

To access the CLI from the MS-DOS prompt, move to the directory
containing the afacli executable and then type afacli , as in the
following example:
C:\>cd Program Files\Adaptec_SCSI_RAID\AAC
C:\Program Files\Adaptec_SCSI_RAID\AAC>afacli

Accessing the CLI in Windows

This section discusses the various methods for accessing the CLI in
Windows.
Note:
accepted the default location for the software during
installation.
To access the CLI:
1 Click the Start button and move the mouse cursor to Programs.
Click on Programs.
2 Move the mouse cursor to SMBE. The Adaptec program group
will display.
3 Move the mouse cursor to the CLI icon. Click on CLI.

Accessing CLI in Linux and UNIX

To access the CLI from the UNIX/Linux prompt, display a window
and type aaccli in any directory. When the system displays the
CLI> prompt, you can use CLI commands.
For the commands to work in any directory, the path in the startup
file (.login or .cshrc) must include the directory where the
software is installed. See your UNIX/Linux documentation for
information on setting up directory paths in the .login and
.cshrc files.
The following procedure assumes that you
Introduction
1-2