Blinking Appliances, Enclosures, And Disk Drives - Adaptec Snap Server 700i Series User Manual

Blinking Appliances, Enclosures, and Disk Drives

You can blink the LEDs on your iSCSI Storage Appliances, enclosures, and the disk
drives installed in your appliances and enclosures to identify where they are
physically located.
To blink a component:
In Adaptec Storage Manager, right-click the component, then select
1
This table describes what to right-click to blink specific iSCSI Storage Appliances,
enclosures, and disk drives.
Right-click...
iSCSI Storage Appliance in the
Enterprise View
Controller icon in the Physical Devices
View
Disk Drive icon
Enclosure Management Device icon
Pool icon
Logical Device icon
The LEDs on the component begin to flash.
Click to stop blinking the component.
OK
2
Text in the Logical Devices View All disk drives included in all pools on a
Text in the Logical
Devices View
Chapter 9 Maintaining Your iSCSI Storage Appliance
Blinking Appliances, Enclosures, and Disk Drives
To Blink...
The iSCSI Storage Appliance
All disk drives installed in an iSCSI
Storage Appliance and attached JBODs
A specific disk drive
An enclosure
All disk drives included in a pool
All disk drives included in a logical drive
specified iSCSI Storage Appliance
All disk drives included in all the logical
drives on a selected controller
.
Blink...
103