Table of Contents
Advertisement
The Reconf array type does not appear on UNIX systems.
The Total Size Column
This column displays the size of the array. You specify this size
when creating the array with one of the container create-
related commands.
The Stripe Size Column
This column displays the stripe size for the array. You specify the
stripe size when using the container create mstripe,
container create raid5, and container create stripe
commands.
The Usage Column
This column displays information about the data on or the status of the
array. Specifically, the column can display the items listed in
Item
FAT
MultPart
NetWare
None
NTFS
Open
UnCfged
Unknown
UnMap'd
Valid
Table 3-2 Container Usage Items
Meaning
The FAT file system resides on this array.
A file system resides on a multi-partition array. A multi-
partition array is an array that has multiple operating
system or DOS partitions.
The array resides in a NetWare environment.
No file system resides on this array.
The NTFS file system resides on this array.
For UNIX, there is a mounted file system on this array.
The array is a phantom array or the array is offline.
An unknown file system resides on this array.
For UNIX, the operating system recognized this array, and
there has not been a query (e.g., mount, fdsk, read, write) on
the array.
The array is unusable and cannot be mounted.
The UNIX operating system recognized this array, and there
has been a query (e.g., mount, fdsk, read, write) on the array.
container Commands
Table
3-2.
3-53
Advertisement
Table of Contents
