Evinrude 4906B 4HP 1969 Owner's Manual page 155

4-64 FUEL
10- Place the pickup check valve
sembly in position, and then start the com-
pression nut BY HAND
threading. Tighten
the proper size wrench.
Position a
11-
around the fuel pump opening on the tank.
12- Lower the complete
the fuel tank. Align the retaining
holes with the matching holes in the gasket
and tank.
13- Securing the pump in place with the
attaching screws. Use
each screw to prevent fuel linkage through
the screw holes.
14- Slide the push button onto the pump
plunger.
15- Secure the push button in place with
a cotter pin. After the pin is in place
NEW
and the ends have been bent back in the
usual manner, clip off the ends of the pin to
prevent scratching
the pump is operated.
buttom will rotate in a full circle, without
binding.
to prevent cross-
the nut securely with
gasket in place
NEW
assembly into
screw
tiny gaskets on
NEW
a finger or hand when
Check to be sure the
FUEL
PICKUP
as-
®