Evinrude 4906B 4HP 1969 Owner's Manual page 302

new
A shift cradle (right)
worn and unfit for service (left).
Check the water intake screen and pas-
sages by removing the bypass cover, if one
is used. Inspect the dutch dog, drive gears,
pinion gear, and thrust
these items if they appear
dutch dog and drive gear arrangement
faces are nicked,
rounded, the operator
the shift operation
trols may not be adjusted correctly.
items MUST be replaced
aged.
Inspect the dog ears on the inside of the
forward and reverse gears.
be replaced if they are damaged.
Check the cradle that rides on the inside
diam eter of the dutch dog. The sides of the
The web area indicated should
ly for the slightest sign
of a
smallest evidence
housing because exhaust gases will find their
water area
the pump when the engine is operating
the boat planing. These exhaust gases will
to
engine run hot.
compared with one badly
washers. Replace
worn. If the
sur-
chipped, or the edges
may be performing
improperly or the con-
These
if they are dam-
The gears must
be inspected careful-
of a
hairline crack.
to
crack is cause replace
way
cause the
MANUAL SHIFT 28 HP TO 40 HP
Distorted tapered bearing unfit for further
cradle must be in good condition,
any damage or signs of wear.
wear has occurred,
placed.
Check the shift lever and the two prongs
that fit inside the cradle.
the prongs are not worn or rounded.
age or wear to the prongs indicates
lever must be replaced.
a
Using punch
retainer.
The
the
into
and
a
Installing
the O-ring has been installed.
If damage or
the cradle must be re-
Check to be sure
to
remove the seal from the bearing
seal into the bearing retainer.
8-43
service.
free of
Dam-
the
Notice