Evinrude 4906B 4HP 1969 Owner's Manual page 256

Adjustment
5-
Temporarily
and then move the throttle
until the boss mark on the bottom of the
throttle hand aligns with the mark on the
side of the shift box panel.
6- Remove the panel and depress the
three buttons one at-a-time.
possible to depress the buttons, loosen the
two screws on the selector
the bracket forward or aft until the buttons
can be depressed.
secure the bracket in the proper position.
7-
Install the shift box cover and secure
it in place with the four screws.
install the side plate,
hand forward
If it is not
bracket. Move
Tighten the screws to
PUSH3UTTON SHIFT BOX
CRITICAL WORDS
If the throttle adjustment is not properly
performed, the circuit to the starter
noid will be opened preventing
motor from cranking the engine.
ment is made by moving the throttle
ad justm ent knob in the trunion on the
of the engine.
7-23
sole-
the starter
Adjust-
cable
side