Evinrude 4906B 4HP 1969 Owner's Manual page 150

2- Check to be sure the proper hose is
connected to the correct
buretor. The hose on the left in the accom-
panying illustration
and the hose on the right is the fuel supply
line. Notice the rib extending
length of the fuel hose.
3- Remove the fuel tank cap.
nect the retaining chain from inside of the
fuel cap. The chain may hang free inside
the fuel tank.
4- If the chain cannot be disconnected
from the cap by removing
screw, then remove
inside the tank. The chain and cap can then
be removed as an assembly.
5- Remove the cotter pin from the push-
knob on the fuel pump plunger.
6- Remove the push knob from the pump
plunger. If the knob is "frozen" and cannot
be removed easily, hold the plunger with a
pair of pliers and work the knob free with a
second pair of pliers.
fitting at the car-
is the air pressure line
the full
Discon-
the retaining
the cotter pin from
CAP
FUEL TANK AND LINE 4-59