Evinrude 4906B 4HP 1969 Owner's Manual page 366

bolts. Install the retaining
them securely. Connect
the carburetor and the compression release.
ATOP FLYWHEEL NO RETURN SPRINGS
bolts and tighten
the linkage from
9-6 TYPE III MOUNTED
MODEL WITH NO RETURN
28 HP 1964
33 HP 1965-70
40 HP 1964-70
WARNING
As with other types of hand starters,
rewind spring is a potential
spring is under tremendous
is wound -- a real tiger in a cage.
spring should accidentally
vere personal injury could result from being
struck by the spring with force.
the service instructions
again MUST, be followed closely to prevent
release of the spring at the
Such action would be a BAD SCENE, a very
BAD SCENE, because serious personal injury
could result.
The starter rope should
leased from the extended
action would allow the spring to wind with
incredible speed, resulting in serious damage
to the starter mechanism.
Any time the rope is broken, the starter
spring will rewind
Such action will cause the spring to rewind
past its normal travel
spring will be bent
Therefore, if the rope has been broken, the
starter should be completely
and the spring repaired or replaced.
ATOP FLYWHEEL
SPRINGS
hazard. The
tension when it
If the
be released,
Therefore,
MUST, and we say
wrong time.
NEVER be re-
position. Such
with incredible speed.
and the end of the
back out of shape.
disassembled
9-31
the
se-